DFM Analysis, Injection Molding Help Spring Company Reduce Costs

An Illinois-based steel-spring manufacturer recently called on Proto Labs to help reduce component count and save time and money on a device the company uses to market its services to the aerospace, automotive, oil and gas, and medical industries.

Smalley has long equipped its sales force with a small demo device, a handheld “comparator” that shows the relative size and performance of a wave spring—which Smalley manufactures—compared with a coil spring.

The company turned to Proto Labs for help with solving a cost issue when Smalley considered redesigning the comparator to “use them as ‘giveaways’ to prospective customers,” explained Lane Persky, Smalley marketing manager. “We were looking to go from about 20 of the original comparators, which each cost about $100 to produce, to an initial run of 1,000 redesigned comparators at a target cost of about $15 each.”

Proto Labs’ design for manufacturability (DFM) analysis, and its injection molding service, helped Smalley designers create a new comparator, which would require just seven parts. The original comparators each consisted of 23 parts.

“We chose Proto Labs for the company’s reputation and ability to do both advanced 3D printing for prototyping and affordable, rapid injection molding” for low-volume production, said Persky.


CASE STUDY: Sea Ray Charts New Course with Production Help from Proto Labs

Brunswick Corp.’s Sea Ray luxury boat brand is known for its high-end, opulent yachts that often command seven-figure sales tags. As you might expect, no detail is considered too small, not even something as seemingly mundane as the air-conditioning drainage system on Sea Ray’s L650 Fly model (pictured).

So, when the boat builder redesigned its AC drain-line arrangement, and then extended that new design from the L650 Fly to two other Sea Ray models, the company created a significant supply challenge, which Proto Labs was called on to meet.

The grill was manufactured in a durable, corrosion-resistant ABS plastic at Proto Labs.

“Proto Labs was definitely able to help us more seamlessly go from prototype to production, which is important in our market, to be able to make that transition quickly,” said Randy Hasson, project leader with Brunswick’s recreational boat group in Merritt Island, Florida.