Editor’s Note: The Engineerist is a three-part blog series written by Michael Corr, founder of Los Angeles-based manufacturing consulting firm, DuroLabs. This is part two.
Certification testing is expensive, especially when your product fails.
I was managing an engineering team several years ago when we submitted a new product with an injection-molded enclosure to UL for certification testing. The tests included a mechanical stress test with some rather extreme impact forces. This product was a deviation to a predecessor and therefore had legacy requirements which constrained our design options. With the time pressure we had to get the product to market, the mechanical engineering team and I were hoping a few modest changes to the existing legacy injection mold would be sufficient to pass the new certification testing and go into production. They weren’t.
Prototype Prep Before UL Testing
After a humbling blow to our egos and sizeable invoices from both the molder and UL, we took another approach. The ME team reviewed the points of failure of the plastic enclosure and came up with a few design improvements. But we didn’t want to risk failure again, and UL required testing parts fabricated from the actual production mold. It would be too expensive and risky if we were to modify the tool and fail again. Continue reading