Formlabs Standard Resin 3D Printing Material
Formlabs Standard resin is a general-purpose SLA material that captures fine details and produces smooth surfaces
What is Formlabs Standard Resin?
Formlabs Standard resin is a general-purpose SLA material that captures fine details and produces smooth surfaces. It creates rigid parts for evaluating a design’s form and fit. The Standard resin family includes black, white, grey, and clear formulations, with matte finishes available in the opaque colours.
Formlabs Standard Resin Overview
|
|
|
|
|
|
Formlabs Standard Resin Properties
| Property | Test Method | Metric Value | Imperial Value |
|---|---|---|---|
| Ultimate tensile strength | ASTM D638-10 | 65 MPa | 9,380 psi |
| Tensile modulus | ASTM D638-10 | 2.8 GPa | 402 ksi |
| Elongation at failure | ASTM D638-10 | 6.2% | 6.2% |
| Flexural modulus | ASTM D790-10 | 2.2 GPa | 320 ksi |
| Notched Izod impact strength | ASTM D256-10 | 25 J/m | 0.46 ft·lbf/in |
| HDT at 1.82 MPa (264 psi) | ASTM D648-07 | 58.4 °C | 137.1 °F |
| HDT at 0.455 MPa (66 psi) | ASTM D648-07 | 73.1 °C | 163.6 °F |
| Data sheet | Download data sheet (PDF) | ||
Values are based on manufacturer testing and are approximate. Actual part properties may vary with geometry, machine settings, and processing conditions. This information is not binding and is not deemed to be certified. When performance is critical, consider independent laboratory testing of the material or finished part.
