PA12 40% Glass-Filled (PA614-GS)

PA12 40% Glass-Filled (PA614-GS) is a nylon material available for Selective Laser Sintering 3D Printing.

PA12 40% Glass-Filled

What is PA12 Glass-Filled?

PA12 40% Glass-Filled is a polyamide powder loaded with glass spheres that add stiffness and dimensional stability. The material possesses higher thermal resistance than unfilled polyamides and exhibits excellent long-term wear resistance. Due to the glass additive, it has decreased impact and tensile strengths compared to other nylons.



Applications

The material’s stiffness and temperature resistance makes it suited for components like armatures and mounting plates.

Tolerances

For well-designed parts, tolerances of ±0.012 in. plus ±0.002 in./in. for each additional inch can typically be achieved.
Note that tolerances may change depending on part geometry.

Key Product Benefits

  • Stiffness and dimensional stability
  • Long-term wear resistance
  • High temperature resistance 

Related Materials

  • PA11 Black
  • PA12 40% Glass-Filled Black
  • PA12 Mineral-Filled (PA620-MF)

 


PA12 40% Glass-Filled (PA614-GS)Properties

All of the figures contained on this data sheet are approximate and dependent on a number of factors, including but not limited to, machine and process parameters.
The information provided is therefore not binding and not deemed to be certified

Property Test Method Value
Color - White
Sintered Density ASTM D792 1.22 g/cm³
Water absorption (20 °C, 50% relative humidity) ASTM D570 0.5 ± 0.2%
Water absorption, 24 hrs. in boiling water ASTM D570 2.0 ± 0.3%
E-Module (x-y plane) ASTM D638, test speed 10mm/min 3,600 ± 400 MPa
E-Module (z plane) ASTM D638, test speed 10mm/min 3,600 ± 400 MPa
Tensile strength (x-y plane) ASTM D638, test speed 10mm/min 46 ± 4 MPa
Tensile strength (z plane) ASTM D638, test speed 10mm/min 42 ± 5 MPa
Elongation at break (x-y plane) ASTM D638, test speed 10mm/min 5 ± 2%
Elongation at break (z plane) ASTM D638, test speed 10mm/min 3 ± 2%
Heat deflection temperature @ 0.46 MPa* ASTM D648 157 °C (314 °F)
Heat deflection temperature @ 1.82 MPa* ASTM D648 96 °C (204 °F)

*From supplier data sheet


More Resources