Accura 7820 (ABS-like Black)

Accura 7820 is a durable material for general purpose prototyping.

3D Printed ABS-like Black (Accura 7820) Part

Product Description

ABS-like Black or Accura 7820 is a durable material for general purpose prototyping. Its deep black color and glossy, cosmetic up-facing surfaces in a top profile offer the appearance of a molded part. Part sidewalls and down-facing surfaces will have a matte finish. The material has good dimensional stability and moisture resistance.

Key Product Benefits

  • Glossy, cosmetic up-facing surface
  • Moisture resistance
  • Dimensional stability


Applications

ABS-Like Black is a good general purpose material for a variety of prototypes that mimic molded prototypes as well as functional assemblies. Common uses include housings for electronics and consumer goods.

Tolerances

For well-designed parts, tolerances in the X/Y dimension of ±0.002 in. (0.05mm) for the first inch plus ±0.001 in./in., and Z-dimension tolerances of ±0.005 in. (0.127mm) for the first inch plus ±0.001 in./in. (0.001mm/mm), can typically be achieved.
Note that tolerances may change depending on part geometry.


ABS-like Black (Accura 7820) Properties

All of the figures contained on this data sheet are approximate and dependent on a number of factors, including but not limited to, machine and process parameters. The information provided is therefore not binding and not deemed to be certified.

Property Test Method Value
Color - Black
Density in solid state* @ 25 °C (77 °F) 1.16 g/cm³
Water absorption (20 °C, 50% relative humidity) ASTM D570 0.25 ± 0.15%
E-module (x-y plane) ASTM D638, test speed 10mm/min 3,000 ± 400 MPa
Tensile strength (x-y plane) ASTM D638, test speed 10mm/min 55 ± 10 MPa
Elongation at break (x-y plane) ASTM D638, test speed 10mm/min 5 ± 3%
Heat deflection temperature @ 0.46 MPa* ASTM D648 51 °C (124 °F)
Heat deflection temperature @ 1.82 MPa* ASTM D648 -

* From supplier data sheet